Europe’s biggest conference on maintenance & asset management September 24-27, 2018 | Antwerp, Belgium Euromaintenance 4.0 presents a unique opportunity to share your experience and expertise or to showcase your innovation in these fields. Euromaintenance, since 1972 the most important European conference for Maintenance, was for the first time organised in Belgium in 2008. Up […]
Formation Analyse Vibratoire Niveau 2 conforme à l’ISO 18436.2 et ASNT Cette formation de 5 jours propose une vue approfondie de l’analyse vibratoire. La formation se termine par un examen facultatif menant au certificat ISO18436-2 et ASNT. Découvrez le programme complet : Programme Mobius Cat 2 Inscrivez-vous via ce formulaire : Formulaire inscription Cat 2
INTERNATIONAL MACHINE VIBRATION ANALYSIS & CONDITION MONITORING CONFERENCE From workshops, learning sessions and case studies to the latest technologies featured in the expo, the conference provides practical learning in the important aspects of industrial vibration analysis, the complementary condition monitoring technologies, and reliability improvement. IMVAC 2018 will take place at the Crowne Plaza Antwerp. On wednseday, […]
Qu’est-ce que l’efficacité énergétique ? Selon la norme ISO 50001 :2011, l’efficacité énergétique est définie comme « un ratio, ou autre relation quantitative, entre une performance, un service, un bien ou une énergie produits et un apport en énergie ». L’amélioration de l’efficacité énergétique correspond à une réduction des consommations d’énergie, tout en gardant le même service rendu ou […]
In its March 2018 edition of its International Newsletter, the British Institute of Non-Destructive Testing has published an article about the global market demand growth of industrial vibration sensor. According to a Technavio research study, this market is expected to grow at a compound annual growth rate (CAGR) of above 11 % during the period […]
I-care made of predictive maintenance its specialty and acquired a world fame on the subject. Very active in R&D, I-care collaborated with NCP Wallonia to join European research projects and participates thanks to it to the PROPHESY project.
Wi-care and I-see have been forming a good team for more than two years now. I-see, the first web-based platform integrating multiple predictive technologies, provides to customers a comprehensive and accurate diagnostic of mechanical assets. It collects data from Wi-care on site through a gateway and interpretes them. However, at I-care, engineers don’t want to […]
The concept of Augmented Reality has been around for decades, but the technology to deploy AR across the entire manufacturing industry is now emerging faster than ever before as is a wealth of digital content. GET INSPIRED & AUGMENT YOUR KNOWLEDGE is what you can expect from us on April 20th. Together with PTC and BEMAS we […]
I-care will present during the Job Fair of Thomas More institute Campus De Nayer. Come, visit our booth and discuss with our colleagues about job opportunities at I-care.
I-care will be present during Maintenance 2018 which will be held from 21 to 22 March 2018 in Antwerp, Belgium. Come to visit us on our booth and discover how we see the future of Predictive Maintenance and Reliability Engineering.
Formation Analyse Vibratoire Niveau 1 conforme à l’ISO 18436.2 et ASNT Ce cours de 4 jours propose une première introduction à l’analyse vibratoire. Après 3.5 jours de cours, la formation se termine par une demi journée d’examen facultatif menant au certificat ISO18436-2 et ASNT Niveau 1. Découvrez le programme complet : Programme Mobius Cat1 Inscrivez-vous via […]
Challenger ses plans de maintenance ? Oui mais comment? Si la plupart des entreprises disposent déjà de plans de maintenance, beaucoup de responsables se posent la question de la pertinence de toutes ces tâches réalisées de manière préventive et prédictive. Nous vous proposons d’en discuter ensemble, lors de notre table ronde du 29 mars 2018, […]
Wind turbines often impress by its majestic aspect. But such machines need to be correctly maintained. Let’s summarize the 4 steps for a good wind turbine inspection. The wind industry profitability is based on the health of each component of the wind turbine generator. The experts will focus on reducing unplanned shutdowns, reducing maintenance and […]
An Anglo-Australian multinational mining company confirmed its first order of Wi-care Triax. A double “good news” ! With this order, I-care made a double steps : entering the Australian market and the Mining industry. These two markets (geographic & industry segment) are strategic by their business potential. Indeed, Australia is one of the largest mixed […]
The 21th century’s industries are focusing more than ever on industry 4.0 and Asset Management. This systematic cost-effective process of developing, operating, maintaining, upgrading, and disposing of assets won’t stop seducing industries all around the world. Many organizations struggle to maintain high-performing equipment asset management programs, costing them millions of dollars in production losses and […]
Since November 7th 2017, the Wi-care™ range (wireless technology sensors) is KCs certified and can be sold to Korean market, including to hazardous atmosphere industries. This is a new step in the sales development of Wi-care™ technology and products. What is Wi-care™ ? Wi-care™ is a wireless technology developed by I-care for the condition based monitoring […]
From October 24th, 2017, ARG EMEA NV. and I-care sprl. have signed a binding agreement which is the base of a strategic merge of both companies. I-care shareholders have acquired 100% of the ARG EMEA shares and will now integrate both companies into one new structure. The company is now 100% privately owned and in Belgian […]
How can we discuss Predictive Maintenance and Reliability without mentioning lubrication and oil analysis? Did you know that more than 40% of bearing failures appear before its end-of-life due to bad lubrication? Indeed, properly lubricated machines live so much longer, and on-site oil analysis validates effective lubrication. Lubrication often left in a corner Oil analysis […]
The world of the industry always stayed in perpetual evolution with the main purpose to increase its production at a lower cost. The arrival of the 4.0 revolution Just like had taken place the industrial revolution in 17th century, as well as the productive economies of scale and the automated production, a new revolution is […]